laser slimming machine

1.Laser 2.slimming&shaping 3.integrated with tripolar rf 4.cavuum liposuction

Salon Use Ultrasound Machine AYJ-A801 (CE)

 

  

 

 

Accessories

 

1.LED screen

2.Power supply line jack

3.General power swith

4.Control button A-1 laser pad jack

5.Control button A-2 laser pad jack

6.Control button B-3 laser pad jack

7.Control button B-4 laser pad jack

8.Control button C-5 laser pad jack

9.Control button C-6 laser pad jack

10.Control button D-7 laser pad jack

11.Control button D-8 laser pad jack

 

 

  

Machine Panel + Interface

1. Put the accessories well and connect them to the host

2. Insert power supply line to [2] ,turn on the General power switch [3]

3. As (Fig 1) shows, Touch any place on screen to enter interface as (Fig 2) shows.

 

2. Choose the model BIO, Click the and , choose model “A”, as (Fig 4 ) shows ,or model “B” as (Fig 5) shows ,or model “C”model as (Fig 6 ) shows .

 

Operation steps of Laser Pads

1.clean the skin, find the laser treatment pads and belts, then tie them up to the treatment area.

2.The laser pads control button A ,B,C ,D (each button control 2 pads)

3.Setting work time ,Click or to increase or minus the time. 30 minutes per treatment, 1 time per week and 6 treatments is needed for a course.

4.According to laser pads control button to adjust Strength and Frequency, click than click or (adjust from low to high or high to low ).

5.Click “”. then it starts to work with red light flashing.

6.The machine will stop automatically when the setting time is running out, then the beautician loosen the belts and take down all laser pads from treatment area.

  

Same Series

Factory and Certification